If you're looking for a printable electronics project enclosure, this model offers a practical rectangular box with a separate snap-fit lid. Designed for makers and hobbyists, this enclosure is ideal for housing small electronics projects, prototyping, or organizing components. The enclosure features a clean, functional design with rounded corners and cable pass-throughs, making it a versatile choice for anyone needing a reliable project box.
This printable electronics project enclosure stands out for its thoughtful design details. The box measures approximately 100 x 70 x 40 mm on the outside, with sturdy 2.5 mm thick walls and rounded outer corners for durability and a professional look. The open-top design allows the lid to sit into a 2 mm deep inner ledge, providing a light sliding fit for easy access. Four M3 clearance holes in the base corners make mounting straightforward, and two 8 mm diameter cable pass-throughs on one short wall allow for convenient wiring. The interior is left hollow for maximum usable space, and the enclosure is optimized to print flat on the bed for best results.
For this printable electronics project enclosure, print the base flat on the bed to ensure stability and clean mating surfaces. A standard layer height is suitable for functional parts like this, and the 2.5 mm wall thickness provides strength without excessive print time. No supports should be needed if printed as designed, and moderate infill (around 20-30%) is typically sufficient for enclosures. Prioritize clean walls and accurate dimensions for the snap-fit lid and cable pass-throughs.
This print-ready STL for a printable electronics project enclosure is available on SliceFoundry, where you can find more practical designs for your next build.
Getting a clean print starts with the right slicer settings. This model pairs well with a ABS slicer profile on SliceFoundry — tuned by AI for reliability, surface quality, and consistent results straight out of the slicer.