This profile is a finely tuned filament setup for Bambu Lab PLA Basic 1.75mm, designed specifically for use with Orca Slicer on Bambu Lab printers such as the X1 Carbon. It is ideal for makers and engineers seeking reliable, everyday print performance with consistent results. The profile emphasizes balanced quality, strength, and print reliability, making it a dependable choice for general-purpose 3D printing tasks.
The profile is based on thorough temperature tower testing, resulting in optimal settings of 220 °C for the hotend and 55 °C for the bed. These temperatures ensure strong layer adhesion and minimal stringing, while the cooling and fan settings are tuned for crisp details and smooth surfaces. The configuration leverages Orca Slicer's advanced features to deliver consistent results across a range of medium-sized prints.
Temperature Control: The hotend is set to 220 °C for standard layers, with a slightly higher initial layer temperature to promote first-layer adhesion. The bed is maintained at 55 °C, supporting reliable adhesion without warping.
Cooling: The part cooling fan runs at 100% after the first layer, ensuring sharp overhangs and clean bridging. Overhang and bridge-specific fan settings further enhance print quality on complex geometries.
Pressure Advance: Enabled with a value of 0.04, this setting helps reduce oozing and improves corner sharpness, especially on fast-moving Bambu Lab machines.
Print Quality: Standard 0.2mm layer height and approximately 25% infill density strike a balance between speed and strength, suitable for most general-purpose prints.
Bed Adhesion: A skirt is used for priming the nozzle and ensuring a clean start to each print.