This profile is designed for eSUN ABS+ 1.75mm filament, specifically tuned for use with PrusaSlicer. It is ideal for makers and engineers seeking a reliable ABS+ setup that minimizes warping while maintaining the material’s renowned heat resistance. The profile balances print quality, part strength, and consistent results, making it suitable for both beginners and experienced users working on functional, heat-resistant parts.
ABS+ is formulated to be easier to print than standard ABS, with reduced warping and improved reliability. This profile leverages a 240 °C hotend and a 95 °C heated bed to ensure strong layer adhesion and minimize the risk of warping. The use of a draft shield or enclosure is recommended to further stabilize the print environment, helping to produce consistent, high-quality results even on medium-sized parts.
Hotend and Bed Temperatures: The 240 °C nozzle and 95 °C bed temperatures are optimized for ABS+, promoting strong interlayer bonding and reducing the likelihood of warping or delamination.
Draft Shield/Enclosure: Using a draft shield or enclosure is recommended to protect prints from ambient air currents, which can cause uneven cooling and warping. This is especially important for ABS-based materials.
Bed Adhesion: A brim is used to increase the contact area with the bed, further reducing the risk of edge lift. For best results, print on a PEI or glass bed with a light application of hairspray.
Layer Height and Infill: The standard 0.2 mm layer height and approximately 25% infill density provide a good balance between print speed, surface finish, and part strength.
Perimeters (Walls): Three solid perimeters are used to enhance the mechanical strength and heat resistance of printed parts.