This profile is designed for printing multi-color PLA objects on the Bambu Lab A1 using OrcaSlicer with the AMS system. It is ideal for makers and engineers seeking clean, reliable color transitions on small decorative and artistic prints. The settings are tuned for fine detail, consistent strength, and dependable results, especially when working with multiple colors.
The profile is carefully tuned to optimize color changes by adjusting purge tower size and flush volumes, ensuring minimal color contamination between transitions. The settings balance fine print quality with efficient material use, making it well-suited for small, detailed objects. By leveraging the AMS and precise slicer adjustments, this profile delivers sharp, vibrant color separation and smooth surfaces.
Purge Tower and Flush Volumes: The purge tower is set to 30x30mm, with flush volumes tuned for each color pair. This ensures clean transitions and prevents unwanted color mixing.
Layer Height and Quality: The profile uses a fine 0.1mm print quality, supporting detailed features and smooth surfaces on small prints.
Infill and Walls: Standard infill density of around 25% and two perimeter walls provide a good balance of strength and material efficiency for decorative objects.
Bed Adhesion: A skirt is used for bed adhesion, which helps prime the nozzle and stabilize the print start without excessive material use.
Supports: No supports are enabled, making this profile best suited for models that do not require overhang support.